Pneumatic tubing


Pneumatic tubing Master-Tube PUR 98A

PUR

Pneumatic tubing Master-Tube PUR 98A

  • lightweight
  • high flexibility at low temperatures
  • UV resistant
  • hight elasticity
  • good damping behaviour
  • excellent abrasion resistance
  • excellent resistance against tear propagation
  • kink resistant
  • oil and grease resistant
  • easily fitted
  • minimal pressure loss
  • available in a range of colours
  • small bending radius
  • unplasticized so no embrittlement
  • individual printing is possible

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Standard sizes

Outside-Ø:
0,157 to 0,63 inch
4,0 to 16,0 mm

Standard colours

natural
black
blue

Special sizes & colours upon request


Pneumatic tubing Master-Tube PA 12w

PA

Pneumatic tubing Master-Tube PA 12w

  • lightweight
  • excellent temperature resistance
  • highly resistant to shock and impact
  • excellent compressive strength
  • high chemical resistance to oil, grease, fuels, solvent and hydraulic fluids
  • excellent resistance to UV-rays
  • highly resistant to stress cracking
  • excellent abrasion resistance characteristics
  • water insensitive
  • easily fitted
  • minimal pressure loss
  • available in a range of colours
  • calibrated

Temperature range

-40 °C to +90 °C
-40 °F to +194 °F

Standard sizes

Outside-Ø:
0,157 to 0,866 inch
4,0 to 22,0 mm

Standard colours

natural
black
blue

Special sizes & colours upon request


Pneumatic tubing Master-Tube PA-E

PA-E

Pneumatic tubing Master-Tube PA-E

  • high flexible (incomparison with Nylon 11/12 soft)
  • lightweight
  • excellent temperature resistance
  • highly resistant to shock and impact
  • excellent resistance to UV-rays
  • water insensitive
  • unplasticized so no embrittlement
  • good chemical resistance characteristics
  • lasting flexibility
  • calibrated
  • easily fitted
  • available in a range of colours
  • available in a range of hardness grades

Temperature range

-40 °C to +80 °C
-40 °F to +176 °F

Dimensions & colours upon request


Pneumatic tubing Master-Tube PE LD

LD-PE

Pneumatic tubing Master-Tube PE LD

  • lightweight
  • physiologically safe and tasteless (complies with FDA regulation 21 CFR 177.120 c 2.1)
  • low permeability for water, water vapor and gases
  • resistant to various chemicals (see table of chemical resistance)
  • sterilizable using ethylene oxide and gamma rays
  • good dielectric characteristics
  • easily fitted
  • available in a range of colours
  • low price

Temperature range

-30 °C to +70°C
-22 °F to +158 °F

Standard size

Outsite-Ø:
0,157 to 0,709 inch
4,0 to 18,0 mm

Special sizes & colours upon request

Standard colours

natural
black
blue


Master-Tube PUR 98A Duo & Master-Tube PUR 98A Trio

PUR

Master-Tube PUR 98A Duo & Master-Tube PUR 98A Trio

  • lightweight
  • high flexibilty at low temperatures
  • good elasticity
  • high buffering capacity
  • excellent abrasion resistance
  • kink resistant
  • unplasticized so no embrittlement
  • easily fitting
  • no bundling necessarily
  • each tube has a different colour for easy identification
  • easy separation
  • air/electricity combination possible

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Standard colour combination

blue/black
blue/black/natural


Master-Tube PA 12w Duo & Master-Tube PA 12w Trio

PA

Master-Tube PA 12w Duo & Master-Tube PA 12w Trio

  • lightweight
  • excellent temperature resistance
  • highly resistant to shock and impact
  • excellent compressive strength
  • high chemical resistance to oil, grease, fuels, solvent and hydraulic fluids
  • highly resistant to stress cracking
  • excellent abrasion resistance characteristics
  • easily fitting
  • no bundling necessarily
  • each tube has a different colour for easy identification
  • air/electricity combination possible

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Standard colour combincation

blue/black
blue/black/natural

Please note
Since the separation of multiple PA hoses/tubing free of burs is no longer possible, it is advisable not to use »push-in« connectors.


Paint and Lacquer tubing Master-Tube PUR

PUR

Paint and Lacquer tubing Master-Tube PUR

  • for powder conveying
  • unplasticized
  • no hardening or embrittlement
  • kink resistant
  • flexible
  • high elasticity
  • excellent abrasion resistance
  • long lifespan
  • available in a range of colours
  • available in a range of hardness grades
  • available in antistatic finish
  • individual printing possible

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Dimensions & colours upon request


Paint and Lacquer tubing Master-Tube PA

PA

Paint and Lacquer tubing Master-Tube PA

  • high chemical resistance to oil, grease, fuels, solvents and hydraulic fluids
  • lightweight
  • excellent temperature resistance
  • highly resistant to shock and impact
  • excellent compressive strength
  • excellent UV-resistance
  • highly resistant to stress cracking
  • excellent abrasion resistance characteristics
  • water insensitive
  • easily fitted

Temperature range

-40 °C to +90 °C
-40 °F to +194 °F

Dimensions & colours upon request


Paint and Lacquer tubing Master-Tube PA/PUR 2L

PA/
PUR

Paint and Lacquer tubing Master-Tube PA/PUR 2L

  • multi-layer hose structure
  • suitablel for use as a low-pressure paint sprayer hose
  • optimum profile of properties due to material combination
  • good resistance to solvents due to Nylon core
  • good abrasion resistance due to PUR outer coating
  • good resistance to pressure due to Nylon core
  • optimum flexibility due to PUR outer coating and flexible special Nylon material in the core

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Dimensions & colours upon request


Hydrolyse and microberesistant tubing Master-Tube PUR H

PUR

Hydrolyse and microberesistant tubing Master-Tube PUR H

  • hydrolysis and microbe-resistant PUR special materials
  • unplasticized
  • no hardening or embrittlement
  • kink-resistant
  • excellent flexibility at low temperatures
  • good elasticity
  • highly resistant to abrasion and wear
  • UV resistant
  • available in a range of colours
  • available in different hardness grades
  • individual printing possible

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Dimensions & colours upon request


Hydrolyse and microberesistant tubing (Master-Tube PA, Master-Tube PA-E, Master-Tube PVDF, Master-Tube PE, Master-Tube TPE)

PA, PVDF, PE, PP, PVC, TPE

Hydrolyse and microberesistant tubing (Master-Tube PA, Master-Tube PA-E, Master-Tube PVDF, Master-Tube PE, Master-Tube TPE)

  • all materials hydrolysis and microbe-resistant
  • material properties available on inquiry
  • available in a range of colours
  • available in different hardness grades
  • individual printing possible

Temperature range

depends on the material

Dimensions & colours upon request


Antistatic tubing Master-Tube PUR A

PUR

Antistatic tubing Master-Tube PUR A

  • surface resistance < 108 Ω
  • highly resistant against abrasion
  • high mechanical strength
  • flexible
  • contains no plasticizers so no embrittlement
  • good shock absorbing properties
  • kink resistant
  • oil and grease resistant

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Dimensions & colours upon request


Electrically conductive tubing Master-Tube PUR EL

PUR

Electrically conductive tubing Master-Tube PUR EL

  • electrically conductive; surface resistance 1 x 104 – 1 x 105 Ω
  • low weight
  • extremely flexible at low temperatures
  • UV resistant
  • high elasticity
  • good damping characteristics
  • excellent wear resistance
  • resistant to bending
  • excellent tear propagation resistance
  • oil and grease resistant
  • quick installation
  • small bending radius
  • no embrittlement, because free of plasticisers
  • customised overprint is possible

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Dimensions upon requests

Standard colour

black


Electrical conductive tubing Master-Tube PA EL

PA

Electrical conductive tubing Master-Tube PA EL

  • conducts electricity, surface resistant 105 Ω
  • lightweight
  • excellent compressive strength
  • good tempreature resistance
  • water insensitive
  • excellent resistance to UV-rays
  • good chemical resistance characteristics to oil, grease, fuels, solvent and hydraulic fluids
  • calibrated so suitable for use with pin and socket connectors

Temperature range

-40 °C to +90 °C
-40 °F to +194 °F

Dimensions upon request

Standard colour

black


Temperature resistant tubing Master-Tube PVDF

PVDF

Temperature resistant tubing Master-Tube PVDF

  • excellent temperature resistance
  • excellent pressure strength
  • suitable for use with foodstuffs (FDA CFR 177.2510)
  • suitable for medical applications (USP Class VI Standard)
  • sterilizable
  • non-flammable (UL94 V0)
  • excellent resistance to UV-rays
  • low gas permeability
  • excellent mechianical properties

Temperature range

-40 °C bis +150 °C
-40 °F to + 302 °F

Standard colours

natural

Dimensions & special coulours upon request

 


Temperature resistant tubing Master-Tube TPEE

TPEE

Temperature resistant tubing Master-Tube TPEE

  • high mechianical strength
  • excellent abrasion resistance
  • very good aging stability
  • high flexibility
  • kink resistant
  • good chemical resistance characteristics (like polyurethane - see table of chemical resistance)
  • better temperature resistance than standart pneumatic tubing
  • easily fitted
  • excellent compressive strength combined with high flexibility

Temperature range

-40 °C to +120 °C
-40 °F to + 248 °C

Dimensions & colours upon request

Please note: This hose can be damaged by water and steam (>60 °C/140 °F), as well as by microbes.


Temperature resistant tubing Master-Tube TPE F

TPE

Temperature resistant tubing Master-Tube TPE F

  • highly flexible
  • available in a range of hardness grades
  • similar to types of rubber
  • good chemical resistance characteristics
  • available in special grades suitable for use with foodstuff
  • excellent dynamic fatigue resistance
  • highly flexible at low temperatures
  • excellent resistance to aging from hot air exposure
  • minimal diffusion of liquid and gaseous media

Temperature range

-40 °C to +125 °C
-40 °F to +257 °F

Dimensions & special colours upon request


Chemical resistant tubing Master-Tube PVDF

PVDF

Chemical resistant tubing Master-Tube PVDF

  • excellent resistant to a variety of chemicals (see list of chemical resistance)
  • low gas permeability
  • excellent temperature resistance
  • excellent pressure strength
  • suitable fo use with foodstuffs (FDA CFR 177.2510)
  • suitable for medical applications (USP Class VI Standard)
  • sterilizable
  • non-flammable (UL94 V0)
  • excellent resistance to UV-rays
  • excellent mechanical properties

Temperature range

-40 °C to +150 °C
-40 °F to +302 °F

Standard colour

natural

Dimensions & special colours upon request


Chemical resistant tubing Master-Tube PP

PP

Chemical resistant tubing Master-Tube PP

  • excellent chemical resistance (see list of chemical resistance)
  • highly resistant to heat
  • good surface hardness
  • safe to use with foodstuffs
  • good dielectric strength
  • low hygroscopicity

Temperature range

-25 °C to +90 °C
-13 °F to +194 °F

Dimensions & colours upon request


Food quality tubing Master-Tube PUR F

PUR

Food quality tubing Master-Tube PUR F

  • complies with the consumer article regulation, contained guideline 90/128 EWG (D)
  • complies with FDA- regulations 21CFR 177.1680, 21CFR 175.105 and 21CFR 177.2600
  • hydrolysis and microbe resistant
  • unplasticized
  • no hardening or embrittlement
  • kink resistant
  • excellent flexibility at low temperatures
  • good elasticity

Temperature range

-40 °C to +85 °C
-40 °F to + 185 °F

Dimensions & colours upon request


Food quality tubing Master-Tube PA F

PA

Food quality tubing Master-Tube PA F

  • complies with EU-regulations 90/128, 92/93, 93/9, 95/3, 96/11, 01/62 and 02/72
  • complies with the FDA-regulations 21CFR 177.1500(9)
  • good chemical resistance
  • lightweight
  • good temperature resistance
  • good UV-resistance
  • highly resistant to abrasion
  • quick fitting
  • available in a range of colours

Temperature range

-40 °C to +90 °C
-40 °F to +194 °F

Dimensions & colours upon request


Food quality tubing Master-Tube PE F

PE

Food quality tubing Master-Tube PE F

  • physiologically safe and tasteless (complies with recommendationi III of the BGA and complies with regulation 21CFR 177.120 c 2.1)
  • lightweight
  • low permeation values for water, water vapor and gases
  • resistant to numerous chemicals (refer to chemical resistance table)
  • can be sterilized (ethylene oxide and gamma rays)

Temperature range

-30 °C to +70 °C
-22 °F to +158 °F

Dimensions & colours upon request


Food quality tubing Master-Tube PUR 85A T

PVC

Food quality tubing Master-Tube PUR 85A T

  • complies with European Pharmacopoeia 3.1.1.1, 3.1.1.2 und 3.1.1.4
  • complies with USP XXIV, class 6 and ISO 10993
  • good resistance against oils and greases
  • good dielectric characteristics
  • low inflammability
  • contains plasticizer
  • flexible
  • good chemical resistance
  • Uv and ozone proof
  • available in a range of colours
  • available in a range of hardness´s
  • individual printing possible

Temperature range

-10 °C to +60 °C
-14 °F to +140 °F

Dimensions & colours upon request


Food quality tubing Master-Tube TPE F

TPE

Food quality tubing Master-Tube TPE F

  • complies with FDA 21CFR 177.2600 and 21CFR 177.1210
  • highly flexible
  • good chemical resistance
  • high flexibility at low temperatures
  • minimal diffusion of liquid and gaseous mediums
  • excellent resistance to aging from hot air exposure
  • comparable with rubber types
  • highly dynamic fatigue strength
  • available in a range of colours
  • available in a range of hardness´s
  • individual printing possible

Temperature range

-40 °C to +125 °C
-40 °F to +257 °F

Dimensions & colours upon request


Energy chaining tubing Master-Tube PUR

PUR

Energy chaining tubing Master-Tube PUR

  • good sliding qualities
  • lightweight
  • high flexibility at low temperatures
  • UV resistant
  • highly elasticity
  • high buffering capacity
  • excellent abrasion resistance
  • kink resistant
  • excellent resistance against tear propagation
  • oil and grease resistant
  • easily fitted
  • available in a range of colours
  • small bendingradius
  • unplasticized so no embrittlement
  • individual printing is possible

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Standard colours

natural
black
blue

Special sizes & colours upon request


Energy chaining tubing Master-Tube PA

PA

Energy chaining tubing Master-Tube PA

  • good sliding qualities
  • lightweight
  • excellent temperature resistance
  • highly resistant to shock and impact
  • excellent compressive strength
  • high chemical resistance to oil, grease, fuels, solvent and hydraulic fluids
  • excellent resistance to UV-rays
  • highly resistant to stress cracking
  • excellent abrasion resistance characteristics
  • water insensitive
  • easily fitted
  • minimal pressure loss
  • available in a range of colours
  • calibrated

Temperature range

-40 °C to +90 °C
-40 °F to +194 °F

Standard colours

natural
black
blue

Special sizes & colours upon request


Tubing for special cable Master-Tube PUR

PUR

Tubing for special cable Master-Tube PUR

  • lightweight
  • high flexibility at low temperature
  • UV resistant
  • high elasticity
  • high buffering capacity
  • excellent abrasion resistance
  • kink resistant
  • excellent resistance against tear propagation
  • oil and grease resistant
  • easily fitted
  • available in a range of colours
  • small bendingradius
  • unplasticized so no embrittlement

Temperature range

-40 °C bis +85 °C
-40 °F to +185 °C

Dimensions & colours upon request


Tubing for special cable Master-Tube PA

PA

Tubing for special cable Master-Tube PA

  • lightweight
  • excellent temperature resistance
  • highly resistant to shock and impact
  • excellent compressive strength
  • high chemical resistance to oil, grease, fuels, solvent and hydraulic fluids
  • excellent resistance to UV-rays
  • highly resistant to stress cracking
  • excellent abrasion resistance characteristics

Temperature range

-40 °C to +90 °C
-40 °F to +194 °F

Dimensions & colours upon request


Tubing for special cable Master-Tube PE

PE

Tubing for special cable Master-Tube PE

  • lightweight
  • physiologically safe and tasteless (complies to the recommendation III of BGA and complies with FDA- regulation 21CFR 177.120 c 2.1)
  • low permeability for water, water vapor and gases
  • resistant to various chemicals (see table of chemical resistance)
  • sterilizable using ethylene oxide and gamma rays
  • good dielectric characteristics
  • easily fitted

Temperature range

-30 °C to +70 °C
-22 °F to +158 °F

Dimensions & colours upon request


Master-Tube PUR water-cooling

PUR

Master-Tube PUR water-cooling

  • high flexibility at low temperatures
  • hydrolysis- and microbe resistant special PUR materials
  • unplasticized
  • no hardening or embrittlement
  • kink resistant
  • highly elasticity
  • excellent abrasion resistance
  • UV resistant
  • available in a range of colours
  • available in a range of hardness grades

Temperature range

-40 °C to +85 °C
-40 °F to +185 °F

Dimensions & colours upon request


Master-Tube PVC water-cooling

PVC

Master-Tube PVC water-cooling

  • hydrolysis resistant
  • low flammability
  • good resistance to oils and greases
  • good dielectric characteristics
  • contains plasticizers
  • good chemical resistance
  • flexible
  • UV and ozone resistant
  • available in a range of colours
  • available in a range of hardness grades
  • individual printing possible

Temperature Range

-10 °C to +60 °C
-14 °F to +140 °F

Dimensions & colours upon request


Master-Tube TPE water-cooling

TPE

Master-Tube TPE water-cooling

  • highly flexible at low temperatures
  • highly flexible
  • hardly flammable in accordance with UL94 V0
  • good chemical resistance characteristics
  • minimal diffusion of liquid and gaseous mediums
  • similar to types of rubber
  • excellent dynamic fatigue resistance
  • available in a range of colours
  • available in a range of hardness grades

 

 

Temperature range

-40 °C to +125 °C
-40 °F to +257 °F

Dimensions & colours upon request


© Masterflex Group. All rights reserved.